How to erase my hard drive and start over

Notice: Remember that following the steps below will erase all of the information on your hard drive and make it like new. Once the steps below have been completed, you will not be able to reverse the steps if you want to recover possible lost data.

• Making sure all private information is erased.
• Unable to restore computer using restore disc.

Erasing the hard drive

Click on a link below for instructions on how to erase the hard drive and re-install Windows.

Windows 8
Windows 7 and Vista
Windows XP and 2000
MS-DOS 5.0+, Windows 3.x, 9x/ME, and NT 4.0

Tip: If you have an OEM computer (Acer, ASUS, Dell, Hewlett Packard, etc.), it's likely that you have a hidden System Recovery partition and don't need to use any CD or DVD to restore your computer.

Windows 8

1. Press the Windows key plus the "C" key to open the Charms menu.
2. Select the Search option and type reinstall in the Search text field (do not press Enter).
3. Select the Settings option.
4. On the left side of the screen, select Remove everything and reinstall Windows.
5. On the "Reset your PC" screen, click Next.
6. On the "Do you want to fully clean your drive" screen, select Just remove my files to do a quick deletion of your personal files on the computer or select Fully clean the drive to have all files erased and overwritten several times with random data.
7. On the "Ready to reset your PC" screen, click Reset.

The hard drive will be erased and Windows 8 will be re-installed.

Windows 7 and Vista

1. Insert the Windows 7/Vista installation CD in the CD-ROM drive and restart the computer.
2. When you see the message "Press any key to boot from CD", press a key on the keyboard.
3. Press the Enter key at the Windows Setup welcome screen.
4. When prompted, press any key on your keyboard.
5. On the "Install Windows" page, select your preferred language and other preferences, then click Next.
6. On the License Agreement page, accept the terms and agreements and click Next.
7. On the Installation Type screen, choose the Custom option.
8. Select the Drive Options (advanced) option.
9. For Disk 0, delete all partitions. When all partitions have been deleted, you should see a single entry named "Unallocated space".
10. Click on Disk 0 and select Next.

The Windows installation process will proceed with creating a new partition, formatting the partition, and installing Windows on the hard drive.

Windows XP and 2000

1. Insert the Windows XP/2000 installation CD in the CD-ROM drive and restart the computer.
2. When you see the message "Press any key to boot from CD", press a key on the keyboard.
3. Press the Enter key at the Windows XP Setup welcome screen, then press F8 to accept the Terms and Agreements.
4. Follow the on-screen instructions to select a hard drive partition to format and install Windows XP on.
5. After formatting the hard drive, erasing all data, click on one of the links below for steps on how to install Windows XP or Windows 2000.

• How do I install Microsoft Windows XP.
• How to install Microsoft Windows 2000.

MS-DOS 5.0+, Windows 3.x, 95, 98, ME, and NT 4.0.

1. Place the bootable diskette or disc inside the computer and reboot to get to the DOS prompt. In some cases, you may need to boot the computer with CD-ROM support or press a key to boot from the disk.
2. At the MS-DOS prompt type, format c: /s

Note: If the "format c: /s" command does not work, you may need to download the format.com file to your boot disk.

3. The computer will ask you "Are you sure you want to erase everything on drive c:". If you are ok with doing this, press "Y" for yes and press Enter.
4. After doing this, the computer will begin the formatting process. While the computer is formatting, make sure no errors are encountered.
5. Once the format process is completed successfully, at the MS-DOS prompt, type fdisk /mbr and press Enter. This should return you back to the MS-DOS prompt with no message. This step is not required but recommended.
6. Once back at the MS-DOS prompt, reboot the computer with the boot disk still in the computer.
7. Once back at the MS-DOS prompt, insert either the diskettes for MS-DOS, Windows 3.x, Windows 95, or the CD for Windows 95, Windows 98, Windows ME or Windows NT and click the appropriate link below for install instructions.

MS-DOS users
Windows 3.x users
Windows 95 floppy diskette users
Windows 95 CD users
Windows 98 users
Windows NT 4.0 users

Windows NT 4.0 users

Windows NT can be installed different ways. We recommend that Windows NT be installed using the steps below as we feel that these steps by far are the easiest way to install Windows NT 4.0.

First, we recommend that all users wanting to install Windows NT use the /b switch, which allows the users to not need to create the diskettes. We do, however, recommend that the user create the Emergency recover diskettes if they have not already been created after the installation of Windows NT.

Finally, before the installation of Windows NT, it is recommended that you run SMARTDRV, which helps the installation of Windows NT run a lot faster.

1. Place the CD into the computer.
2. Type X: (where x is the CD-ROM drive, often this is D:).
3. Once at the appropriate drive, type CD WINNT and press enter to get into the Windows 95 directory.
4. Once at X:\WINNT> Type winnt /b.
5. Follow the on-screen instructions to complete the installation.

Windows 98 users

• How to install Microsoft Windows 98.

Windows 95 CD users

1. Place the CD into the computer.
2. Type X: (where x is the CD-ROM drive, often this is D:).
3. Once at the appropriate drive, type CD WIN95 and press enter to get into the Windows 95 directory.
4. Once at X:\WIN95> Type setup to begin the installation
5. Follow the on-screen instructions to complete the installation.

If you are encountering issues during the setup process, you can add additional switches to the setup command line.

Windows 95 floppy diskette users

1. Place the first diskette of Windows 95 into the computer.
2. At the A:\> Type setup and press enter to begin the installation.
3. Follow the on-screen instructions to complete the installation.

Note: If you discover a bad diskette during the installation of Windows 95 it is recommended you contact Microsoft for possible replacement.

Windows 3.x users

1. Place the first diskette of Windows 3.x into the computer.
2. At the A:\> Type setup and press enter to begin the installation.
3. Follow the on-screen instructions to complete the installation.

Note: If you discover a bad diskette during the installation, it is recommended that you contact Microsoft for a possible replacement.

MS-DOS users

1. Place the first MS-DOS diskette into the computer.
2. At the A:\> Type setup and press enter to being the installation.
3. Follow the on-screen instructions to complete the installation.

Note: If you discover a bad diskette during the installation, it is recommended that you contact Microsoft for a possible replacement.